Talk:Power take-off
 | This article is rated Start-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | ||||||||||
| |||||||||||
Note to self[edit]
Useful info and cite here: http://www.tractordata.com/articles/technical/pto.html Gary van der Merwe (Talk) 12:31, 18 April 2007 (UTC) In addition - PTO standards are defined in ISO 500. Gary van der Merwe (Talk) 13:17, 18 April 2007 (UTC)
PTO uses aside from tractors[edit]
I know that tractors are the most common usage of PTO, but what about mentioning the uses back in the days of Willys? I know I found a Jeep Gladiator with a PTO, I know the Unimog utilizes it as well, and I believe the "fire jeep", the American Marsh Pump Jeep CJ-2 (one of the first civilian jeeps, made in 1945) used some sort of PTO to power the pump. Zchris87v 19:32, 21 June 2007 (UTC)
Uses in Agriculture[edit]
I think that uses of a PTO in agriculture should be included (especially since this article is part of the agriculture project...)
A few uses:
Blower for filling a silo (pushes corn/hay/whatever up a tube, in a nutshell)
Manure pit drainage
Operating field equipment for harvesting (corn, grass, whatever)
Running generators
Types[edit]
Should a section about the different types of pto be added? (The types Im refering to are the types on a tractor. The types are: Transmission, Live, and Independent.)
-User:Everysubjectman —Preceding unsigned comment added by 75.197.48.83 (talk) 02:05, 1 June 2010 (UTC)
Balancing link[edit]
Why is there a link to balancing machines? Balancing machines have nothing to do with PTO, they don't run off them and aren't used in anything directly related to PTOs. — Preceding unsigned comment added by 71.193.153.97 (talk) 02:40, 22 September 2012 (UTC)
-What the proper procedure for installing or mounting a PTO...???? -Why is it important to use studs rather than bolts when installing a PTO...??? -
Power Take off units[edit]
Why would A Power take Off Unit Blow oil out of its exhaust System? Thank you — Preceding unsigned comment added by 71.74.153.219 (talk) 12:55, 12 July 2014 (UTC)
Units in table[edit]
Current the table for ISO 500 says:
| Type | RPM | Diameter | Splines |
|---|---|---|---|
| 1 | 540 | 1+3⁄8 in or 35 mm | 6 straight |
| 2 | 1,000 | 1+3⁄8 in or 35 mm | 21 involute |
| 3 | 1,000 | 1+3⁄4 in or 44 mm | 20 involute |
| 4 | 1,300 | 57.5 millimetres (2.26 in) | 22 involute |
Are the diameters correct per ISO? Some work out to imperial measurements but the type 4 is just slightly off from 2 1/4 inches. The first 3 types e.g. {{convert|1+3/4|in|disp=or|abbr=on}} whereas type 4 uses {{convert|57.5|mm|in}}. —DIYeditor (talk) 12:47, 13 July 2023 (UTC)