UTF-32

From Wikipedia, the free encyclopedia
(Redirected from UCS-4)

UTF-32 (32-bit Unicode Transformation Format) is a fixed-length encoding used to encode Unicode code points that uses exactly 32 bits (four bytes) per code point (but a number of leading bits must be zero as there are far fewer than 232 Unicode code points, needing actually only 21 bits).[1] UTF-32 is a fixed-length encoding, in contrast to all other Unicode transformation formats, which are variable-length encodings. Each 32-bit value in UTF-32 represents one Unicode code point and is exactly equal to that code point's numerical value.

The main advantage of UTF-32 is that the Unicode code points are directly indexed. Finding the Nth code point in a sequence of code points is a constant-time operation. In contrast, a variable-length code requires linear-time to count N code points from the start of the string. This makes UTF-32 a simple replacement in code that uses integers that are incremented by one to examine each location in a string, as was commonly done for ASCII. However, Unicode code points are rarely processed in complete isolation, such as combining character sequences and for emoji.[2]

The main disadvantage of UTF-32 is that it is space-inefficient, using four bytes per code point, including 11 bits that are always zero. Characters beyond the BMP are relatively rare in most texts (except for e.g. texts with some popular emojis), and can typically be ignored for sizing estimates. This makes UTF-32 close to twice the size of UTF-16. It can be up to four times the size of UTF-8 depending on how many of the characters are in the ASCII subset.[2]

History[edit]

The original ISO/IEC 10646 standard defines a 32-bit encoding form called UCS-4, in which each code point in the Universal Character Set (UCS) is represented by a 31-bit value from 0 to 0x7FFFFFFF (the sign bit was unused and zero). In November 2003, Unicode was restricted by RFC 3629 to match the constraints of the UTF-16 encoding: explicitly prohibiting code points greater than U+10FFFF (and also the high and low surrogates U+D800 through U+DFFF). This limited subset defines UTF-32.[3][1] Although the ISO standard had (as of 1998 in Unicode 2.1) "reserved for private use" 0xE00000 to 0xFFFFFF, and 0x60000000 to 0x7FFFFFFF[4] these areas were removed in later versions. Because the Principles and Procedures document of ISO/IEC JTC 1/SC 2 Working Group 2 states that all future assignments of code points will be constrained to the Unicode range, UTF-32 will be able to represent all UCS code points and UTF-32 and UCS-4 are identical.[5]

Utility of fixed width[edit]

A fixed number of bytes per code point has a number of theoretical advantages, but each of these has problems in reality:

  • Truncation becomes easier, but not significantly so compared to UTF-8 and UTF-16 (both of which can search backwards for the point to truncate by looking at 2–4 code units at most).[a][citation needed]
  • Finding the Nth character in a string. For fixed width, this is simply a O(1) problem, while it is O(n) problem in a variable-width encoding.[6] Amateur programmers often vastly overestimate how useful this is: in reality an algorithm that knows n without first examining the n-1 characters before it (an O(n) problem) are very rare or non-existent.[citation needed] In addition Unicode code points are often not equivalent to what the user thinks is a "character", for instance both of these Emoji are 3 code points: "👨‍🦲 Man: Bald"[7] and "👩‍🦰 Woman: Red Hair".[8][9]
  • Quickly knowing the "width" of a string. In practice, even with a "fixed width" font and restricting the characters to the BMP, finding the string width from a count of code points is impossible. There are combining forms like 'é' as expressed using two code points 'e' + ' ́ ' and "fixed width" may assign a width of 2 to CJK ideographs, and some code points take multiple character positions per code point ("grapheme clusters" for CJK).[6]

Use[edit]

The main use of UTF-32 is in internal APIs where the data is single code points or glyphs, rather than strings of characters. For instance, in modern text rendering, it is common[citation needed] that the last step is to build a list of structures each containing coordinates (x,y), attributes, and a single UTF-32 code point identifying the glyph to draw. Often non-Unicode information is stored in the "unused" 11 bits of each word.[citation needed]

Use of UTF-32 strings on Windows (where wchar_t is 16 bits) is almost non-existent. On Unix systems, UTF-32 strings are sometimes, but rarely, used internally by applications, due to the type wchar_t being defined as 32 bit. Python versions up to 3.2 can be compiled to use them instead of UTF-16; from version 3.3 onward all Unicode strings are stored in UTF-32 but with leading zero bytes optimized away "depending on the [code point] with the largest Unicode ordinal (1, 2, or 4 bytes)" to make all code points that size.[10] Seed7[11] and Lasso[citation needed] programming languages encode all strings with UTF-32, in the belief that direct indexing is important, whereas the Julia programming language moved away from builtin UTF-32 support with its 1.0 release, simplifying the language to having only UTF-8 strings (with all the other encodings considered legacy and moved out of the standard library to package[12]) following the "UTF-8 Everywhere Manifesto".[13]

Variants[edit]

Though technically invalid, the surrogate halves are often encoded and allowed. This allows invalid UTF-16 (such as Windows filenames) to be translated to UTF-32, similar to how the WTF-8 variant of UTF-8 works. Sometimes paired surrogates are encoded instead of non-BMP characters, similar to CESU-8. Due to the large number of unused 32-bit values, it is also possible to preserve invalid UTF-8 by using non-Unicode values to encode UTF-8 errors, though there is no standard for this.

See also[edit]


Notes[edit]

  1. ^ For UTF-8: Select point to truncate at. If the byte before it is 0-0x7F, or the byte after it is anything other than the continuation bytes 0x80-0xBF, the string can be truncated at that point. Otherwise search up to 3 bytes backwards for such a point and truncate at that. If not found, truncate at the original position. This works even if there are encoding errors in the UTF-8. UTF-16 is trivial and only has to back up one word at most.

References[edit]

  1. ^ a b Constable, Peter (2001-06-13). "Mapping codepoints to Unicode encoding forms". Computers and Writing Systems - SIL International. Retrieved 2022-10-03.
  2. ^ a b "FAQ - UTF-8, UTF-16, UTF-32 & BOM". Unicode. Retrieved 2022-09-04.
  3. ^ "Publicly Available Standards - ISO/IEC 10646:2020". ISO Standards. Retrieved 2021-10-12. Clause 9.4: "Because surrogate code points are not UCS scalar values, UTF-32 code units in the range 0000 D800-0000 DFFF are ill-formed". Clause 4.57: "[UCS codespace] consisting of the integers from 0 to 10 FFFF (hexadecimal)". Clause 4.58: "[UCS scalar value] any UCS code point except high-surrogate and low-surrogate code points".
  4. ^ "Annex B - The Universal Character Set (UCS)". DKUUG Standardizing. Archived from the original on Jan 22, 2022. Retrieved 2022-10-03.
  5. ^ "C.2 Encoding Forms in ISO/IEC 10646" (PDF). The Unicode Standard, version 6.0. Mountain View, CA: Unicode Consortium. February 2011. p. 573. ISBN 978-1-936213-01-6. It [UCS-4] is now treated simply as a synonym for UTF-32, and is considered the canonical form for representation of characters in 10646.
  6. ^ a b Goregaokar, Manish (January 14, 2017). "Let's Stop Ascribing Meaning to Code Points". In Pursuit of Laziness. Retrieved 2020-06-14. Folks start implying that code points mean something, and that O(1) indexing or slicing at code point boundaries is a useful operation.
  7. ^ "👨‍🦲 Man: Bald Emoji". Emojipedia. Retrieved 2021-10-12.
  8. ^ "👩‍🦰 Woman: Red Hair Emoji". Emojipedia. Retrieved 2021-10-12.
  9. ^ "↔️ Emoji ZWJ (Zero Width Joiner) Sequences". emojipedia.org. Retrieved 2021-10-12.
  10. ^ Löwis, Martin. "PEP 393 -- Flexible String Representation". python.org. Python. Retrieved 26 October 2014.
  11. ^ "The usage of UTF-32 has several advantages".
  12. ^ JuliaStrings/LegacyStrings.jl: Legacy Unicode string types, JuliaStrings, 2019-05-17, retrieved 2019-10-15
  13. ^ "UTF-8 Everywhere Manifesto".

External links[edit]